SummaCut D140 54 in (137 cm) vinyl and contour cutting - New

$5,745.99
Save $550

MODELS	D60	D75	D120	D140	D160
CUTTING TYPE	Drag knife with TurboCut and Tangential Emulation Modes
TOOL COMPATIBILITY	Blade, Pen, Pounce Tool
CUTTING WIDTH	23 inch (60 cm)	29 inch (74 cm)	47 inch (120 cm)	53 inch (135 cm)	62 inch (158 cm)
CUTTING SPEED	All SummaCut models cut at speeds up to 44 inches per second (113 cps) diagonal
AXIAL SPEED	Up to 2 G
ALIGNMENT TYPE	OPOS X Barcode job recognition Up to 2 x 64 marks on the X-line Y-Line compensation
MAXIMUM ACCELERATION	Up to 3 G diagonal
TRACKING PERFORMANCE	Within ± 0.004 in. (± 0.1 mm) on plots up to 26 ft. long (8 m) on rolls up to 760 mm wide Within ± 0.004 in. (± 0.1mm) on plots up to 13 ft. (4 m) long on rolls over 760 mm wide
CUTTING FORCE	0-400 grams of down-force, in 5 gram increments
REPLOT MEMORY	4 MB (buffer size: 16 MB)
DISPLAY LANGUAGES	English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian
CONNECTIVITY	USB, Serial RS232, Ethernet (only on SummaCut D120, D140 - not FX - & D160)
POWER REQUIREMENTS	100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS	39 (W) x 13.8 (D) x 11 (H) in. (100 (W) x 35 (D) x 30 (H) cm)	45 (W) x 13 (D) x 11 (H) in. (115 (W) x 35 (D) x 30 (H) cm)	63 (W) x 26.8 (D) x 45 (H) in. (160 (W) x 68 (D) x 114.5 (H) cm)	68 (W) x 26 (D) x 45 (H) in. (175 (W) x 68 (D) x 114.5 (H) cm)	77 (W) x 26 (D) x 45 (H) in. (198 (W) x 68 (D) x 114.5 (H) cm)
WEIGHT	33 lbs (15 kg)	37 lbs (17 kg)	92 lbs (42 kg)	106 lbs (48 kg)	119 lbs (54 kg)
OPERATING TEMPERATURE	59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES	WinPlot or MacSign Cut Software, CutterControl Parameter Software, CD w/ Manuals and Drivers, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), 1 Spare Fuse, Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades.
OPTIONAL ACCESSORIES	Stand or Basket for SummaCut D60 / SummaCut D75