SummaCut D140 54 in (137 cm) vinyl and contour cutting - New + 2 YEARS WARRANTY
| MODELS |
D60 |
D75 |
D120 |
D140 |
D160 |
| CUTTING TYPE | Drag knife with TurboCut and Tangential Emulation Modes | ||||
| TOOL COMPATIBILITY | Blade, Pen, Pounce Tool | ||||
| CUTTING WIDTH | 23 inch (60 cm) | 29 inch (74 cm) | 47 inch (120 cm) | 53 inch (135 cm) | 62 inch (158 cm) |
| CUTTING SPEED | All SummaCut models cut at speeds up to 44 inches per second (113 cps) diagonal | ||||
| AXIAL SPEED | Up to 2 G | ||||
| ALIGNMENT TYPE |
|
||||
| MAXIMUM ACCELERATION | Up to 3 G diagonal | ||||
| TRACKING PERFORMANCE | Within ± 0.004 in. (± 0.1 mm) on plots up to 26 ft. long (8 m) on rolls up to 760 mm wide Within ± 0.004 in. (± 0.1mm) on plots up to 13 ft. (4 m) long on rolls over 760 mm wide |
||||
| CUTTING FORCE | 0-400 grams of down-force, in 5 gram increments | ||||
| REPLOT MEMORY | 4 MB (buffer size: 16 MB) | ||||
| DISPLAY LANGUAGES | English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian | ||||
| CONNECTIVITY | USB, Serial RS232, Ethernet (only on SummaCut D120, D140 - not FX - & D160) | ||||
| POWER REQUIREMENTS | 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum | ||||
| DIMENSIONS | 39 (W) x 13.8 (D) x 11 (H) in. (100 (W) x 35 (D) x 30 (H) cm) | 45 (W) x 13 (D) x 11 (H) in. (115 (W) x 35 (D) x 30 (H) cm) | 63 (W) x 26.8 (D) x 45 (H) in. (160 (W) x 68 (D) x 114.5 (H) cm) | 68 (W) x 26 (D) x 45 (H) in. (175 (W) x 68 (D) x 114.5 (H) cm) | 77 (W) x 26 (D) x 45 (H) in. (198 (W) x 68 (D) x 114.5 (H) cm) |
| WEIGHT | 33 lbs (15 kg) | 37 lbs (17 kg) | 92 lbs (42 kg) | 106 lbs (48 kg) | 119 lbs (54 kg) |
| OPERATING TEMPERATURE | 59˚ to 95˚F (15˚ to 35˚C) | ||||
| STANDARD ACCESSORIES | WinPlot or MacSign Cut Software, CutterControl Parameter Software, CD w/ Manuals and Drivers, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), 1 Spare Fuse, Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades. | ||||
| OPTIONAL ACCESSORIES | Stand or Basket for SummaCut D60 / SummaCut D75 | ||||
